“Had an issue with my furnace, not running correctly and I thought it was short cycling so I called Bear Creek after having another HVAC contractor looked at it. Charge me $150 and didn't really fix the problem. The owner Kevin showed up and was able to identify the issue had a short-term fix until we could get it fixed. Kevin was very knowledgeable and a nice guy and didn't even me for the short term solution. I would strongly recommend him!”
Heat Pump Inspection in Centennial, CO
- Load Calculation Included
Manual J load calculation confirms system is sized correctly for your home
- Refrigerant Charge Verification
Precise refrigerant level testing identifies leaks or undercharge issues
- Actionable Report Provided
Clear findings with maintenance needs and repair recommendations, no pressure
“Where can I start? Kevin is extremely responsive and knowledgeable. Prices are also reasonable for the quality of work performed. I had an emergency leak in my basement today (had a flight to catch in a couple of hours) and denver water was taking too long to shut the water off in the house. Kevin took time out of his day off to stop by my house and temporarily fix the leak so I could make my flight later that day! The professionalism is unmatched! I will be using Kevin and his team on all sorts of projects going forward. Can’t recommend highly enough!”
“Kevin and his team came into my old moutain home and helped me install a new tankless water heater and a new furnace. They ran into all sorts of unknowns at the house, my well line started leaking into basement and it was just the tip of the iceberg. Kevin stayed numerous days helping me fight problems that were not even part of his installation. He is one who you can say will have your back through thick n thin! He sticks to what he says, where most people would try to stick it to you for unseen work.. His instalation was very thorough and he made sure I was happy before he left. l sure appreciate you helping me fight the fight with courage and leadership. Thank you Kevin and Team A+++”
What We Do
Heat pump inspections that help Centennial homeowners verify system condition before purchase or repair decisions
Covering load calculation to confirm proper sizing, refrigerant charge testing, airflow measurement, electrical connection checks, and efficiency verification
Pre-Installation Load Calculation
Manual J assessment confirms correct system tonnage for your home's heating and cooling needs
Heat Pump Performance Inspection
Refrigerant charge, airflow measurement, and efficiency verification with maintenance needs report
Why Us
Manual J load calculation and refrigerant testing with every inspection
Most inspection problems start with incomplete testing. Without load calculation and refrigerant verification, you don't know if the system is sized correctly or operating at design efficiency.
Common Challenges
No baseline for system performance
Without professional inspection, you can't tell if declining efficiency is normal wear or a fixable problem
Hidden issues before home purchase
Buying a home without heat pump inspection means inheriting unknown repair costs and efficiency problems
Repair versus replacement uncertainty
Without detailed diagnostics, you're guessing whether to invest in repairs or replace the entire system
How We Help
Manual J load calculation verification
Confirms system tonnage matches home heating and cooling load, preventing short-cycling or inadequate capacity
Refrigerant charge tested to manufacturer spec
Precise superheat and subcooling measurements reveal leaks or undercharge that reduce efficiency by 20-30%
Airflow measurement at each register
CFM testing identifies duct leaks or blockages that prevent proper heat distribution across rooms
Pre-purchase negotiation leverage
Inspection report documents needed repairs, giving you concrete data for price reduction requests
Clear maintenance needs identified
Inspection reveals coil cleaning, filter replacement, or electrical issues before they cause breakdowns
Manual J load calculation verification
Confirms system tonnage matches home heating and cooling load, preventing short-cycling or inadequate capacity
Refrigerant charge tested to manufacturer spec
Precise superheat and subcooling measurements reveal leaks or undercharge that reduce efficiency by 20-30%
Airflow measurement at each register
CFM testing identifies duct leaks or blockages that prevent proper heat distribution across rooms
Pre-purchase negotiation leverage
Inspection report documents needed repairs, giving you concrete data for price reduction requests
Clear maintenance needs identified
Inspection reveals coil cleaning, filter replacement, or electrical issues before they cause breakdowns
Who We Help
Centennial homeowners and buyers who need system verification
From pre-purchase assessments to performance diagnostics on existing systems
Homebuyers Evaluating Executive Homes
Buyers considering Centennial executive homes who need pre-purchase inspection to verify heat pump condition and avoid inheriting repair costs
Owners of Mid-Century Ranches Planning Upgrades
Mid-century ranch owners noticing performance decline who want inspection before deciding on repair versus replacement
New Construction Buyers Verifying Installation
New construction buyers in gated communities who want baseline inspection to confirm system was sized and installed correctly
How We Work
How Heat Pump Inspection Works
From initial request to detailed report with actionable recommendations
Request Inspection
Tell us about your home and inspection needs. We arrange a local Centennial technician to contact you with availability and pricing.
System Assessment
Technician performs load calculation, tests refrigerant charge, measures airflow, and checks electrical connections and component condition.
Report & Recommendations
You receive a detailed report with efficiency metrics, maintenance needs, and repair recommendations with no pressure to schedule work.
About This Service
About this Service
A Heat Pump Inspection in Centennial targets larger executive homes, gated communities, and newer construction where system sizing and zoning matter. It suits owners and builders who need assurance that a high-capacity or multi-zone system meets performance expectations.
Inspectors perform Manual J sizing cross-checks, measure airflow per zone, verify refrigerant charge through superheat/subcooling, and confirm thermostat zoning and control wiring. For properties with geothermal options, the inspection notes available land, loop-field access, and whether loop-pressure or flow tests are advisable.
You receive a concise report that highlights zone imbalances, duct leakage points, and whether geothermal or multi-split arrangements are correctly installed. The report may recommend targeted repairs or a staged replacement plan for large-capacity systems.
FAQ
Common Questions About Heat Pump Inspection
What to expect from inspection and how to use the findings
Who We Are
About Aurora Heat Pumps
When heating costs are too high or systems keep breaking down, we help Aurora homeowners and builders arrange heat pump installations that reduce energy use and improve comfort. We gather project details, then route the enquiry to a local heat pump technician who performs a site assessment, load calculation, installation, and final testing.
Our Full StoryOur Mission & Values
We exist to make heat pump installation straightforward for Aurora homeowners and businesses by arranging experienced local technicians who size, install, and service systems properly.
Transparency
Clear quotes before work starts with no hidden fees
Accuracy
Load calculation and sizing assessment for every installation
Accountability
Follow-up after installation to confirm system performance
Locality
Aurora technicians who respond quickly to service requests