“Had an issue with my furnace, not running correctly and I thought it was short cycling so I called Bear Creek after having another HVAC contractor looked at it. Charge me $150 and didn't really fix the problem. The owner Kevin showed up and was able to identify the issue had a short-term fix until we could get it fixed. Kevin was very knowledgeable and a nice guy and didn't even me for the short term solution. I would strongly recommend him!”
Pre-Purchase Heat Pump Inspection in Aurora, CO
- Load Calculation Included
Verify the system is sized correctly for the home's heating and cooling load
- Refrigerant Charge Testing
Check refrigerant levels and electrical connections for proper operation
- No-Pressure Recommendations
Actionable findings without pressure to schedule unnecessary repairs
“Where can I start? Kevin is extremely responsive and knowledgeable. Prices are also reasonable for the quality of work performed. I had an emergency leak in my basement today (had a flight to catch in a couple of hours) and denver water was taking too long to shut the water off in the house. Kevin took time out of his day off to stop by my house and temporarily fix the leak so I could make my flight later that day! The professionalism is unmatched! I will be using Kevin and his team on all sorts of projects going forward. Can’t recommend highly enough!”
“Kevin and his team came into my old moutain home and helped me install a new tankless water heater and a new furnace. They ran into all sorts of unknowns at the house, my well line started leaking into basement and it was just the tip of the iceberg. Kevin stayed numerous days helping me fight problems that were not even part of his installation. He is one who you can say will have your back through thick n thin! He sticks to what he says, where most people would try to stick it to you for unseen work.. His instalation was very thorough and he made sure I was happy before he left. l sure appreciate you helping me fight the fight with courage and leadership. Thank you Kevin and Team A+++”
What We Do
Heat pump inspections that help Aurora homebuyers and property owners verify system condition before making repair or purchase decisions
Covering load calculation to confirm proper sizing, refrigerant charge testing, airflow measurement, electrical connection checks, and efficiency verification with maintenance needs assessment
Pre-Installation Load Calculation
Manual J calculation confirms proper system sizing for your home's heating and cooling load
Heat Pump Performance Inspection
Airflow measurement, refrigerant testing, and electrical checks verify system operation
Why Us
Load calculation and efficiency testing reveal actual system condition
Most heat pump problems hide in plain sight until an inspection measures actual performance against manufacturer specifications and reveals whether the system is sized correctly for the home.
Common Challenges
No idea if the system is failing
Heat pump runs but you don't know if it's operating at acceptable efficiency or slowly declining
Buying a home with unknown condition
Existing heat pump looks fine but you have no verification of its actual performance or remaining lifespan
Repair quote with no second opinion
Contractor recommends expensive repairs but you lack independent verification of what actually needs attention
How We Help
Load calculation confirms proper sizing
Manual J calculation verifies the system matches the home's heating and cooling load requirements
Refrigerant charge testing reveals leaks
Pressure testing and superheat measurement detect refrigerant loss before compressor damage occurs
Airflow measurement identifies duct issues
CFM testing at supply registers reveals whether ductwork is sized correctly for system capacity
Electrical connection inspection prevents failures
Voltage and amperage testing at contactor and capacitor catch loose connections before they cause breakdowns
Pre-purchase leverage in negotiations
Inspection report documenting needed repairs gives you factual basis for price reduction or seller concessions
Load calculation confirms proper sizing
Manual J calculation verifies the system matches the home's heating and cooling load requirements
Refrigerant charge testing reveals leaks
Pressure testing and superheat measurement detect refrigerant loss before compressor damage occurs
Airflow measurement identifies duct issues
CFM testing at supply registers reveals whether ductwork is sized correctly for system capacity
Electrical connection inspection prevents failures
Voltage and amperage testing at contactor and capacitor catch loose connections before they cause breakdowns
Pre-purchase leverage in negotiations
Inspection report documenting needed repairs gives you factual basis for price reduction or seller concessions
Who We Help
Aurora residents who need to verify heat pump condition before making decisions
From homebuyers assessing existing systems to property owners diagnosing performance issues
Homebuyers Considering Properties With Heat Pumps
Buyers evaluating Aurora single-family homes or condominiums who need pre-purchase inspection before closing
Property Owners Noticing Performance Issues
Homeowners in Aurora residential neighborhoods experiencing uneven heating or rising energy bills
Sellers Preparing Homes for Market
Aurora homeowners listing ranch-style houses who want to document system condition for buyers
How We Work
How Heat Pump Inspection Works
From initial request to detailed inspection report with actionable findings
Request Inspection
Tell us about your heat pump and inspection needs. We arrange a local Aurora technician to contact you with availability and pricing.
System Assessment
Technician performs load calculation, tests refrigerant charge, measures airflow, and checks electrical connections at your Aurora property.
Report Delivery
Receive detailed inspection report with findings, efficiency measurements, and maintenance needs without pressure for unnecessary repairs.
About This Service
About this Service
A Heat Pump Inspection in Aurora focuses on system condition and cold-weather performance for homes in Arapahoe, Adams, and Douglas counties. It fits buyers evaluating an existing system and homeowners worried about winter reliability or rising energy use.
Technicians look for common local issues: outdoor unit icing, defrost-cycle failures, low refrigerant charge, and compressor amp spikes that indicate wear. The inspection records supply and return temperatures, static pressure where accessible, and confirms whether the installed capacity matches a Manual J reference.
The deliverable is a clear diagnostic report with measured values and a recommendation for repair or replacement with a cost range. Expect the inspection to flag limits of cold-climate models below about -10°F and to note when further invasive testing is required.
FAQ
Common Questions About Heat Pump Inspection in Aurora
What to expect from inspection and how to use the findings
Who We Are
About Aurora Heat Pumps
When heating costs are too high or systems keep breaking down, we help Aurora homeowners and builders arrange heat pump installations that reduce energy use and improve comfort. We gather project details, then route the enquiry to a local heat pump technician who performs a site assessment, load calculation, installation, and final testing.
Our Full StoryOur Mission & Values
We exist to make heat pump installation straightforward for Aurora homeowners and businesses by arranging experienced local technicians who size, install, and service systems properly.
Transparency
Clear quotes before work starts with no hidden fees
Accuracy
Load calculation and sizing assessment for every installation
Accountability
Follow-up after installation to confirm system performance
Locality
Aurora technicians who respond quickly to service requests