--- title: "Heat Pump Maintenance in Aurora | Aurora Heat Pumps" description: "Heat pump sizing at Colorado’s altitude takes more than a quick online quote. Tell us about your home, and we’ll arrange" canonical: "https://www.auroraheatpumps.com/services/heat-pump-maintenance" lastmod: "2026-11-15T09:58:24.882Z" --- # Heat Pump Maintenance in Aurora ![A heating engineer in a red uniform installs or services an outdoor air source heat pump unit next to a brick wall.](https://utmost-ibex-736.convex.cloud/api/storage/ea9b5909-e4c9-42ba-870b-8c7e4acdf9c2) Keep your system running at rated BTU output through Aurora’s heating season, not just until the first breakdown. - **Written Record Every Visit**: You get a written log of what was checked and found after each visit. - **Estimate Before Booking**: Scope and cost are put in writing before any work is confirmed. - **Altitude-Adjusted Assessment**: Aurora’s elevation is factored into every system evaluation. - **Post-Visit Follow-Up**: We confirm the appointment was completed and send you the maintenance record. ## The maintenance shortcuts that cost more later Skipping specific checks during a maintenance visit leaves the system degrading quietly until a compressor or coil fails. - **Coil Fouling Ignored**: Dirty evaporator or condenser coils cut heat transfer efficiency, forcing the compressor to run longer to hit the same output. **Coil Cleaning Included**: Both coils are cleaned at every visit, restoring heat transfer and reducing compressor run time. - **Refrigerant Drift Missed**: A charge that is even 5% low drops BTU output and raises energy draw, neither triggers a fault code until damage is done. **Charge Verified to Spec**: Refrigerant charge is measured against the unit’s rated spec, not estimated by feel or skipped entirely. - **Airflow Never Tested**: A 10% airflow drop from a clogged filter or blocked return goes unnoticed until the system short-cycles or the compressor overheats. **Airflow Volume Measured**: Airflow is tested against the unit’s rated BTU output so any restriction is caught and corrected before it causes strain. - **No Maintenance History**: Without a written record of past visits, there is no way to spot a pattern, a slow refrigerant leak or recurring filter blockage stays invisible. **Running Written Record**: Every visit produces a written report, building a history of the system’s condition you can reference for warranty or resale. ## Scheduled maintenance that protects BTU output before problems develop A heat pump running at reduced airflow works harder and wears faster than one that is properly maintained. Heat pump maintenance covers the items that degrade quietly: coil fouling, filter restriction, refrigerant charge drift, and electrical connection loosening. Each of these reduces BTU output without triggering an obvious fault. At Aurora’s altitude, where the system is already working against lower air density, even a modest efficiency drop has a larger effect on comfort and running cost. We schedule maintenance visits that test airflow volume, verify refrigerant charge against rated spec, clean evaporator and condenser coils, and inspect electrical connections. Every visit produces a written record of what was checked and what was found, so you have a running history of the system’s condition. Scheduling maintenance before the heating season starts means any issues are found while there is time to address them, not during the first cold snap. We handle the coordination, confirm the appointment, and follow up to make sure the visit was completed. You receive the written maintenance record after every visit. [Request an Assessment](https://www.auroraheatpumps.com/contact) ## Why Aurora Heat Pumps for maintenance? Accountability and written records at every step, from booking through to the completed visit report. - **Written Estimate Before Any Work**: Scope and cost go in writing before a visit is booked, so there are no surprises on the invoice. - **Altitude-Adjusted System Evaluation**: Every assessment accounts for Aurora’s elevation, where air density affects rated output more than most owners expect. - **Written Estimates Only**: We schedule visits from providers we already know, not whoever is available that day. - **Written Record After Every Visit**: You receive a documented log of what was checked and found, building a service history you can use for warranty claims. - **Coordination & Follow-Up Handled**: We confirm the appointment, follow up after the visit, and make sure the maintenance record reaches you. ## From enquiry to completed maintenance visit 1. **Assess Your System**: We evaluate your unit’s age, condition, and service history to scope the maintenance visit accurately before booking. 2. **Confirm the Written Estimate**: You receive an itemised written estimate covering the visit scope and cost before any appointment is confirmed. 3. **Complete & Document the Visit**: The visit covers the full maintenance check, and you get the written record once it’s done. [Request an Assessment](https://www.auroraheatpumps.com/contact) ## Typical Heat Pump Maintenance Prices | Job | Typical cost | | --- | --- | | Basic maintenance visit | $175-$250 | | Full maintenance service | $250-$350 | These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote. [See all prices](https://www.auroraheatpumps.com/pricing) ## Questions about heat pump maintenance in Aurora ### How often should I get my heat pump serviced? Once a year is the standard interval for most homes. If your system runs year-round for both heating and cooling, twice a year keeps it performing at its best. Annual maintenance catches wear, dirty coils, and refrigerant issues before they turn into breakdowns. ### What happens during a heat pump maintenance visit? The inspection covers electrical connections, refrigerant pressure, coil cleaning, thermostat calibration, and airflow through both units. It also checks drainage and looks for early signs of component wear. You get a clear picture of the system’s condition before leaving. ### Does the maintenance visit check both the indoor and outdoor units? Yes, both units are checked. The outdoor unit gets a coil clean, fan inspection, and refrigerant pressure test. The indoor unit gets an airflow check, filter inspection, and drainage review. Skipping either unit leaves half the system unexamined. ### Will maintenance help if my heat pump is running but my home still feels too hot or too cold? Often yes. Dirty coils, low refrigerant, or a miscalibrated thermostat can all cause comfort problems even when the system appears to run normally. A maintenance visit tests each of those factors and identifies which one is reducing output. ### Can maintenance find a hidden problem like a refrigerant leak or airflow issue? Yes. Refrigerant pressure testing and airflow measurement are standard parts of a maintenance visit. Both problems are easy to miss without instruments but show up clearly during a proper check. Catching them early avoids compressor damage and higher energy bills. ### Do I really need maintenance if my heat pump still turns on? Yes. A heat pump can turn on and still be running inefficiently or losing refrigerant slowly. By the time a fault is obvious, the repair bill is usually much larger. Annual maintenance finds those issues while they are still minor. ### Is a quick filter change enough, or do I need a full maintenance visit? A filter change handles one small part of the system. It does nothing for refrigerant levels, coil fouling, electrical connections, or drainage. A full visit covers all of those, so a filter swap alone is not a substitute for annual maintenance. ### Will a maintenance visit clean the system as well as check how it is running? Yes. Coil cleaning and filter inspection are included alongside the performance checks. Dirty coils are one of the most common causes of reduced efficiency, so cleaning is a core part of the visit, not an optional add-on. ### Which areas do you cover for Heat Pump Maintenance? We cover Heat Pump Maintenance in and around Aurora, including Bennett, CO, Centennial, CO, Foxfield, CO, Mission Viejo, CO, Murphy Creek, CO, Denver, CO, Greenwood Village, CO, Englewood, CO, Parker, CO, Lone Tree, CO and Highlands Ranch, CO. If your area isn’t listed, [send us a quick message](https://www.auroraheatpumps.com/contact) to check. ## Arrange a Heat Pump Maintenance Visit We put the scope in writing before any visit is booked and send you the maintenance record once it is done. [Request an Assessment](https://www.auroraheatpumps.com/contact) ## Business details ### Contact - **Phone**: [1 720-936-7533](tel:1720-936-7533) - **Email**: [contact@auroraheatpumps.com](mailto:contact@auroraheatpumps.com) - **Based in**: Aurora, CO, 80010 - **Enquiries**: [Send an enquiry](https://www.auroraheatpumps.com/contact) — We ask for your name, phone number, email and a message. ### Opening hours - **Monday**: 08:00 – 18:00 - **Tuesday**: 08:00 – 18:00 - **Wednesday**: 08:00 – 18:00 - **Thursday**: 08:00 – 18:00 - **Friday**: 08:00 – 18:00 - **Saturday**: 10:00 – 16:00 - **Sunday**: 10:00 – 16:00