---
title: "Geothermal Heat Pumps in Aurora | Aurora Heat Pumps"
description: "Heat pump sizing at Colorado’s altitude takes more than a quick online quote. Tell us about your home, and we’ll arrange"
canonical: "https://www.auroraheatpumps.com/services/geothermal-heat-pumps"
lastmod: "2026-11-15T09:58:24.882Z"
---

# Geothermal Heat Pumps in Aurora

![A modern, clean plant room with multiple white commercial boilers connected to an extensive network of insulated silver pipes, valves, and control panels.](https://utmost-ibex-736.convex.cloud/api/storage/69fcab1d-cfd1-45e8-b013-43963e2f3f31)

Steady BTU output year-round, sized to your lot and soil before a single shovel breaks ground.

- **Written Estimate First**: Scope, equipment, and timeline in writing before any work is booked.
- **Site Assessment Included**: Load, soil conductivity, and loop type reviewed before sizing.
- **Post-Install Check**: System output confirmed against rated specs before the job closes.

## Where geothermal installs fail, and how to avoid it

The loop is underground and inaccessible once buried. Getting the sizing and configuration right before the dig is the only chance you get.

- **Undersized Loop Field**: A loop sized by lot area alone, without soil conductivity data, delivers less BTU than the load calculation requires.
  **Conductivity-Based Sizing**: We arrange a site assessment that measures soil thermal conductivity before the loop length is calculated.
- **Wrong Loop Configuration**: Choosing horizontal trenching on a small lot, or vertical bores where bedrock is shallow, drives up cost and cuts system life.
  **Lot-Matched Loop Type**: Horizontal, vertical bore, or pond loop is selected after reviewing your lot dimensions and subsurface conditions.
- **Permit Gaps**: Geothermal work in the Aurora and Denver metro area requires specific permits; missing one can stall utility coordination or void coverage.
  **Permit-Ready Scope**: Permitting requirements and utility coordination are factored into the installer arrangement from the first estimate.
- **No Backup Heat Plan**: A system installed without a documented backup heat strategy leaves you exposed if the ground loop needs service mid-winter.
  **Documented Backup Strategy**: Backup heat configuration is specified and documented as part of the completed scope, not added as an afterthought.

## Geothermal heat pumps matched to your lot and soil conditions

Ground temperature stays consistent year-round, which changes how the whole system is sized.

Geothermal systems exchange heat with the ground rather than outdoor air, so they maintain steady output even when surface temperatures drop below zero. That consistency changes the sizing calculation. We arrange a site assessment that looks at your lot dimensions, soil thermal conductivity, and whether a horizontal loop, vertical bore, or pond loop is practical for your property.

Once the loop configuration is confirmed, a load calculation determines the BTU capacity needed for your home’s square footage and insulation. You receive a written, itemised estimate covering loop installation, indoor unit, permitting, and timeline. Nothing is scheduled until you have reviewed every line of that estimate and agreed to proceed.

Geothermal installations in the Aurora and Denver metro area require specific permits and sometimes utility coordination. We factor those requirements into the installer arrangement from the beginning. A post-install check confirms the system reaches rated output before the job is closed, and backup heat strategy is documented as part of the completed scope.

[Request an Assessment](https://www.auroraheatpumps.com/contact)

## Why Aurora Heat Pumps for geothermal installation?

Geothermal is a long-term investment with no easy do-overs once the loop is buried. Here is what we put in place to protect that investment.

- **Written Estimate Before Any Dig**: Equipment, loop installation, permitting, and timeline are itemised in writing before any work is scheduled.
- **Assessment Before Commitment**: Every enquiry starts with a system evaluation covering load, existing equipment, and altitude-adjusted sizing.
- **Permit & Utility Coordination Built In**: Aurora-area permit requirements and utility steps are handled as part of the arrangement, not left to you.
- **Post-Install Output Confirmation**: A post-install check verifies the system hits rated BTU output before the job is formally closed.
- **Backup Heat Documented at Handover**: Backup heat strategy is written into the completed scope so you have a clear plan if the system needs service.

## From first enquiry to a running system

1. **Request an Assessment**: Tell us about your property. We schedule an evaluation of lot size, soil conditions, and heating load.
2. **Review Your Estimate**: You receive a written, itemised estimate covering loop type, indoor unit, permits, and timeline before anything is booked.
3. **Install & Confirm Output**: The installer completes the loop and indoor unit, then runs a post-install check to confirm rated BTU output is reached.

[Request an Assessment](https://www.auroraheatpumps.com/contact)

## Typical Geothermal Heat Pumps Prices

| Job | Typical cost |
| --- | --- |
| Small geothermal heat pump system | $15,000-$20,000 |
| Standard geothermal heat pump system | $20,000-$35,000 |
| Larger geothermal heat pump system | $35,000-$45,000 |

These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.

[See all prices](https://www.auroraheatpumps.com/pricing)

## Questions about geothermal heat pumps in Aurora

### How much does geothermal cost for my house?

Guide prices run from $15,000-$20,000 (Small geothermal heat pump system) to $35,000-$45,000 (Larger geothermal heat pump system). A written itemised estimate covering equipment, installation scope, and timeline is provided before any work is booked.

### Is there still a geothermal tax credit in 2026?

Yes, the federal Residential Clean Energy Credit currently covers 30% of geothermal [heat pump installation](https://www.auroraheatpumps.com/) costs with no dollar cap, and it runs through 2032. Consult a tax professional to confirm eligibility for your specific situation, as income and filing status can affect the credit.

### What is a disadvantage of geothermal heat pumps?

The main drawback is upfront cost. Ground loop installation, whether trenched or drilled, adds significant labor and equipment expense compared to a standard furnace or air-source heat pump. The long operating life and lower monthly energy bills offset that over time, but the initial outlay is higher.

### How long does a geothermal heat pump last?

The indoor heat pump unit typically lasts 20-25 years. The ground loop buried outside can last 50 years or more, since it has no moving parts and is protected from weather. That longevity is a key reason the higher upfront cost tends to pay off over the system’s life.

### Will geothermal work in an older home?

Yes, with the right preparation. Older homes often need duct sealing or insulation upgrades to let a geothermal system perform efficiently. A load calculation during the initial evaluation identifies those gaps before installation, so the system is sized to what the home actually needs after any improvements.

### Does my property have enough space for the loop work?

It depends on which loop type fits your lot. Horizontal trenched loops need roughly 400-600 linear feet of trench per ton of capacity. Vertical drilled loops need far less surface area, sometimes just a small equipment staging zone. A site evaluation determines which approach suits your property.

### Can you install geothermal if I do not want major yard digging?

Yes. Vertical drilling requires only a small footprint at the drill site, typically a 10-by-10-foot area, rather than wide trenches across the yard. It disturbs far less surface area than horizontal loops. The trade-off is that drilling equipment and depth add to the installation cost.

### Will drilling or trenching damage my yard?

Some surface disruption is unavoidable. Horizontal trenching leaves a narrow strip of disturbed soil that re-seeds within one growing season. Vertical drilling leaves a small pad area. Installers backfill and grade as they go, and the scope of ground disturbance is outlined in the written estimate before work begins.

### Which areas do you cover for Geothermal Heat Pumps?

We cover Geothermal Heat Pumps in and around Aurora, including Bennett, CO, Centennial, CO, Foxfield, CO, Mission Viejo, CO, Murphy Creek, CO, Denver, CO, Greenwood Village, CO, Englewood, CO, Parker, CO, Lone Tree, CO and Highlands Ranch, CO. If your area isn’t listed, [send us a quick message](https://www.auroraheatpumps.com/contact) to check.

## Arrange a Geothermal Assessment in Aurora

We arrange a written, itemised estimate before any work is booked, no commitment required to get the details.

[Request an Assessment](https://www.auroraheatpumps.com/contact)

## Business details

### Contact

- **Phone**: [1 720-936-7533](tel:1720-936-7533)
- **Email**: [contact@auroraheatpumps.com](mailto:contact@auroraheatpumps.com)
- **Based in**: Aurora, CO, 80010
- **Enquiries**: [Send an enquiry](https://www.auroraheatpumps.com/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00