---
title: "Heat Pump Installation in Aurora | Aurora Heat Pumps"
description: "Heat pump sizing at Colorado’s altitude takes more than a quick online quote. Tell us about your home, and we’ll arrange"
canonical: "https://www.auroraheatpumps.com/"
lastmod: "2026-11-15T09:58:24.882Z"
---

# Heat Pump Installation in Aurora

![A heating engineer in workwear kneels on a lawn, installing or servicing an outdoor heat pump unit.](https://utmost-ibex-736.convex.cloud/api/storage/4cfd447d-6e2b-45db-aa2e-d4a614b567cd)

A correctly sized system, a written estimate, and a post-install check, all arranged before any work begins.

- **Written Estimate First**: Scope, equipment, and timeline in writing before booking.
- **Altitude-Adjusted Sizing**: Load calculation accounts for Aurora’s 5,400-foot elevation.
- **Post-Install Check**: System output verified against spec before the job closes.

## Air-source, mini-split, and geothermal installation, all starting with a load calculation

We handle the assessment, written estimate, and installer coordination so you know exactly what you’re getting before any work is booked.

- **Heat Pump Installation**: Every installation starts with a load calculation and altitude-adjusted sizing, not a guess.
- **[Air Source Heat Pumps](https://www.auroraheatpumps.com/services/air-source-heat-pumps)**: Air-source units sized by BTU load and SEER rating for Aurora’s altitude and climate.
- **[Mini Split Heat Pumps](https://www.auroraheatpumps.com/services/mini-split-heat-pumps)**: Ductless mini-split systems sized by room BTU load, with zoning and freeze protection planned upfront.
- **[Geothermal Heat Pumps](https://www.auroraheatpumps.com/services/geothermal-heat-pumps)**: Ground-loop systems sized to your lot and soil conditions, with a written estimate before any dig.
- **[Heat Pump Inspection](https://www.auroraheatpumps.com/services/heat-pump-inspection)**: A documented inspection checks refrigerant charge, airflow, and controls against rated specs.
- **[Heat Pump Maintenance](https://www.auroraheatpumps.com/services/heat-pump-maintenance)**: Scheduled maintenance covers coil cleaning, refrigerant check, and airflow testing to protect rated output.
- **[Heat Pump Repair](https://www.auroraheatpumps.com/services/heat-pump-repair)**: Fault diagnosis with a written repair estimate before any parts are ordered or work begins.

- **BTU Load Calculation**: Full room-by-room load calc before any system is recommended.
- **Altitude-Adjusted Sizing**: Equipment derated for Aurora’s elevation so rated output holds.
- **System Type Matching**: Air-source, mini-split, or geothermal chosen after the assessment.
- **Itemised Written Estimate**: Equipment, scope, and timeline in writing before booking.
- **Freeze Protection Planning**: Outdoor line protection and backup heat confirmed upfront.
- **Permitting Coordination**: Installer familiar with Aurora and Denver metro permit rules.
- **Post-Install Verification**: Output checked against rated spec before the job is closed.

## Where rushed heat pump jobs go wrong, and what we do differently

The failure modes below are common when altitude, scope, and freeze risk are skipped at the start.

- **Sea-Level Sizing**: A unit spec’d without altitude derating loses meaningful BTU output at Aurora’s 5,400-foot elevation, and no amount of tuning recovers it.
  **Altitude-Adjusted Load Calc**: Every assessment includes a BTU load calculation adjusted for elevation, so rated SEER and heating capacity reflect real Aurora conditions.
- **No Written Scope**: A verbal quote with no itemised breakdown leaves you with no record of what’s included, and no leverage when the final invoice looks different.
  **Itemised Estimate First**: You receive a written estimate covering equipment model, installation scope, and timeline before any installer is booked or deposit is taken.
- **Freeze Risk Ignored**: Outdoor refrigerant lines without a cold-climate protection plan are vulnerable to hard Colorado freezes, which can damage the compressor and void the warranty.
  **Freeze Protection Upfront**: Backup heat strategy and outdoor line protection are addressed during the assessment, not raised as an add-on after the system is already installed.
- **No Post-Install Check**: Many installs are signed off on the day without verifying that the system actually hits its rated output under real operating conditions.
  **Verified Output at Close**: A post-install check confirms the system performs to its specified BTU output and SEER rating before the job is considered complete.

## Why homeowners in Aurora use us to arrange their installation

From first enquiry to post-install check, every step is structured so nothing is left to chance or memory.

- **Assessment Before Any Recommendation**: No system type is suggested until a load calculation and altitude-adjusted sizing review is complete for your property.
- **Everything in Writing Before You Commit**: The written estimate covers equipment, installation scope, and timeline, you see the full picture before booking anything.
- **Installers Who Know Local Permits**: The installers we arrange are familiar with permitting requirements across Aurora and the broader Denver metro area.
- **One Enquiry Covers the Whole Process**: A single request gets you an assessment, a written estimate, and a coordinated installation, no chasing multiple contractors.
- **Post-Install Verification Included**: Before the job closes, a check confirms the installed system hits its rated output, not just that it powers on.

## Three steps from your first enquiry to a verified installation

1. **Submit Your Enquiry**: Tell us about your home. We schedule a load calculation and altitude-adjusted sizing review.
2. **Review Your Written Estimate**: You receive an itemised estimate covering equipment, installation scope, freeze protection, and timeline before any work is booked.
3. **Confirm the Installed Output**: After installation, a post-install check verifies the system performs to its rated BTU output and SEER before the job is closed.

[Request an Assessment](https://www.auroraheatpumps.com/contact)

## Homeowners, landlords, and commercial managers across Aurora

The assessment and written-estimate process works the same way regardless of property type or portfolio size.

- **Homeowners**: Aurora homeowners replacing a gas furnace or adding cooling for the first time who want to know exactly what they’re buying before committing. We arrange a load calculation, altitude-adjusted system match, and written estimate so the full scope is clear before any installer is booked.
- **Property Managers & Landlords**: Landlords and property managers overseeing single-family rentals or small multi-unit buildings who need installations completed on a defined timeline with documented scope. We coordinate the assessment, written estimate, and permitting so the project moves without repeated back-and-forth.
- **Commercial Property Managers**: Commercial property managers in the Aurora area who need zoned heating and cooling across multiple spaces and require written documentation at every stage for budget approval. We arrange site assessments, system-type recommendations, and itemised estimates that match the approval process.

## Why heat pump sizing in Aurora is different from the rest of Colorado

At 5,400 feet, the air is thinner, and that changes how a heat pump performs year-round.

Air-source heat pumps extract heat from outdoor air. At sea level, a unit rated at 36,000 BTU delivers close to that figure in real conditions. At Aurora’s elevation, reduced air density means the same unit moves less heat per cycle. Without an altitude-derating adjustment in the load calculation, the system is effectively undersized from day one, it runs longer, works harder, and rarely hits its rated SEER. The fix is straightforward: the load calculation has to account for elevation before any equipment is selected.

Mini-split systems face the same altitude constraint, with an added layer: each indoor head must be sized to the BTU load of its specific room, not the whole home. An oversized head short-cycles, leaving humidity high and temperature uneven. An undersized one runs continuously without reaching setpoint. We arrange a room-by-room load calculation before any equipment is recommended, so each zone is matched to its actual demand rather than a rough square-footage estimate.

Geothermal systems sidestep the air-density problem entirely by drawing heat from stable ground temperatures below the frost line, typically 50-55 degrees Fahrenheit at Aurora’s depth. That consistency means rated BTU output holds regardless of how cold the outdoor air gets. The trade-off is a more involved site assessment: loop type, soil conductivity, and available lot area all affect system sizing. We arrange that assessment and produce a written estimate covering loop design, equipment, and installation scope before any ground is broken.

[Request an Assessment](https://www.auroraheatpumps.com/contact)

## Typical Heat Pump Installation Prices

| Job | Typical cost |
| --- | --- |
| Heat pump inspection | $150-$300 |
| Heat pump maintenance | $175-$350 |
| Heat pump repair | $250-$900 |
| Air source heat pumps | $6,700-$12,000 |
| Mini split heat pumps | $7,500-$40,000 |
| Geothermal heat pumps | $15,000-$35,000 |

These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.

[See all prices](https://www.auroraheatpumps.com/pricing)

## How We Arrange Heat Pump Installations

Aurora Heat Pumps is an enquiry service for heat pump installation, maintenance, and repair. Tell us about your home. We schedule a property assessment and put the full scope in writing before anything is booked.

### Our Mission

We exist to make heat pump installation straightforward for Aurora-area homeowners and property managers by handling the assessment, written estimate, and installer coordination from the first enquiry.

- **Transparency**: Written scope and itemised estimate delivered before any work is booked.
- **Accuracy**: Load calculations and altitude derating applied before any system is sized.
- **Completeness**: Post-install check confirms output matches the specification on every job.
- **Preparedness**: Freeze protection and backup heat strategy addressed during assessment, not after.

## Heat Pump Installation in Aurora

We cover a wide service area. Enter your ZIP code to check availability near you.

- **[Aurora](https://www.auroraheatpumps.com/)**: In-home assessments for west Aurora, Aurora Highlands & Central Park Aurora.
- **[Bennett, CO](https://www.auroraheatpumps.com/areas/bennett-co)**: Home assessments in Bennett Village, Sky View & Antelope Hills.
- **[Centennial, CO](https://www.auroraheatpumps.com/areas/centennial-co)**: Home assessments in Willow Creek, Homestead & Foxridge
- **[Foxfield, CO](https://www.auroraheatpumps.com/areas/foxfield-co)**: Parker Road, Easter Avenue & large-lot homes covered
- **Mission Viejo, CO**: Mission Viejo ranch homes, Seville townhomes & Cherry Glen condos
- **Murphy Creek, CO**: For Murphy Creek paired homes, townhouses & houses
- **[Denver, CO](https://www.auroraheatpumps.com/areas/denver-co)**: Home assessments for Capitol Hill, Highland & RiNo.
- **[Greenwood Village, CO](https://www.auroraheatpumps.com/areas/greenwood-village-co)**: Serving Huntington Acres, The Preserve & DTC homes
- **[Englewood, CO](https://www.auroraheatpumps.com/areas/englewood-co)**: Serving South Broadway, CityCenter & Arapahoe Acres homes.
- **[Parker, CO](https://www.auroraheatpumps.com/areas/parker-co)**: At-home assessments in Stonegate, Cottonwood & downtown Parker.
- **[Lone Tree, CO](https://www.auroraheatpumps.com/areas/lone-tree-co)**: RidgeGate & Lyric condos, townhomes, and houses covered
- **Highlands Ranch, CO**: Home assessments in Northridge, Westridge & Southridge

### Check Coverage in Your Area

Enter your ZIP code and we’ll confirm whether we cover your address.

[Request an Assessment](https://www.auroraheatpumps.com/contact)

## Questions Aurora homeowners ask before booking a heat pump installation

### How much does a heat pump installation usually cost?

Guide prices run from $150-$300 ([Heat pump inspection](https://www.auroraheatpumps.com/services/heat-pump-inspection)) to $7,500-$40,000 (Mini split heat pumps). You receive an itemised written estimate covering equipment, installation scope, and timeline before any work is booked.

### What is included in a heat pump installation?

Installation covers the equipment, all labour to fit and connect the system, and a post-install performance check. You also get a load evaluation, existing equipment assessment, altitude-adjusted sizing, and a written estimate detailing every item before work begins.

### Will I need electrical work before a heat pump can be installed?

Many homes need a panel upgrade or a dedicated circuit before a heat pump can be connected safely. The pre-installation evaluation checks your existing electrical capacity and flags any required work in the written estimate so there are no surprises on the day.

### Do I need new ductwork for a heat pump?

Not always. If your existing ducts are well-sealed and correctly sized, they can usually carry a ducted heat pump system. Leaky or undersized ducts reduce efficiency significantly, so the pre-install assessment checks duct condition and flags any changes needed. Homes without ducts are good candidates for a [mini-split system](https://www.auroraheatpumps.com/services/mini-split-heat-pumps).

### Will a heat pump work in very cold weather?

Modern cold-climate air-source heat pumps extract heat from outdoor air down to around -13°F, so they operate through Aurora’s typical winter lows. At extreme temperatures, a backup heating element or supplemental system may run alongside the heat pump to maintain comfort.

### Will a heat pump work in very hot weather?

Yes. In cooling mode a heat pump moves heat out of your home just like a central air conditioner, and most units are rated to operate in outdoor temperatures up to 115°F. Aurora’s summer highs are well within that range, so cooling performance is not typically affected.

### How do I know what size heat pump my home needs?

Sizing is calculated through a Manual J load calculation that accounts for your home’s square footage, insulation levels, window area, and local climate, including Aurora’s altitude. The pre-installation evaluation covers this and produces an altitude-adjusted size recommendation before any equipment is specified.

### Will a heat pump work with my current ductwork and floor plan?

It depends on duct condition and layout. The pre-install assessment checks whether existing ducts can distribute airflow evenly across your floor plan. Rooms that are hard to reach with ducts can be served by a supplemental mini-split head unit rather than a full duct extension.

## Arrange a Heat Pump Assessment

Tell us about your home. We schedule a load evaluation, size the system for Aurora’s altitude, and put the full scope in writing before anything is booked.

[Request an Assessment](https://www.auroraheatpumps.com/contact)

## Business details

### Contact

- **Phone**: [1 720-936-7533](tel:1720-936-7533)
- **Email**: [contact@auroraheatpumps.com](mailto:contact@auroraheatpumps.com)
- **Based in**: Aurora, CO, 80010
- **Enquiries**: [Send an enquiry](https://www.auroraheatpumps.com/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00